OKC3S US Marine Bayonet - Genuine Issue - Ontario Knife Company
(NSN: 1095-01-506-3424)
OKC Bayonets
The genuine UMSC issue 13 ¼ inch bayonet features an 8 inch proprietary clip point carbon steel blade and is packed full of features including a phosphate non-reflective finish and the USMC Logo stamped onto the Dynaflex® ergonomically grooved handle.
The ergonomic design of the handle is designed to reduce hand fatigue with positioning access point for quick redirect of positioning of blade in reduced visibility situations. In addition, the full tang blade has 1 ¾ inch mission serration.
The scabbard is made with a low noise signature polyester elastomer and features a ceramic-coated aluminum honing rod located on the back. The scabbard is fitted with an internal stainless steel spring friction device at throat of the scabbard to secure the bayonet. The scabbard is equipped with two load bearing attaching straps with cross straps, which allows for variations of placement on the load bearing equipment.
Designed to fit the M-16, M-4 or C-7 Rifle, the USMC bayonet is US made.
The Brown handle on the OKC3S US Marine Bayonet - Genuine Issue - Ontario Knife Company is made from Dynaflex® which has superior colourfastness.
The Fixed Blade on the OKC 3S US Marine Bayonet is made from 1095 Carbon Steel and features a Flat grind. 1095 Carbon steel ensures durability and excellent edge retention. With a Rockwell hardness rating of 53-58, this Clip Point shaped blade is 8 inches long and is printed with COMBAT USMC.
Field sharpening the OKC 3S is easy with its sharpened edge.
Included with the OKC3S US Marine Bayonet is a Tan Glass Filled Nylon MOLLE Compatible sheath. The back of the scabbard between it and the PALS webbing is a honing rod. The honing rod is accessed by pulling back on the elasticised webbing on the end of the scabbard, releasing its bottom and then swinging the scabbard upward.
- Overall length 13.25 inches (33.66 cm)
- Blade length 8 inches (20.32 cm)
- The blade is a Sharpened Clip Point
- This Fixed Blade knife features a ??? degree edge angle
- Flat grind blade with COMBAT USMC stamped on it
- Brown Dynaflex® handle
- Comes complete with a 6504SH - Tan Glass Filled Nylon sheath
- Made in USA
| Line | Fixed Blades - Tactical |
| Made In | USA |
| Overall Length | 33.66 cm (13 1/4 in.) |
| Weight | Not Available |
| National Stock Number (NSN) | 1095-01-506-3424 |
| Blade Length | 20.32 cm (8 in.) |
| Blade Thickness | 0.508 cm (0.200 in.) |
| Blade Edge | Partially Serrated |
| Blade Steel | 1095 Carbon Steel |
| Blade Finish | Zinc Phosphate |
| Blade Colour | Black |
| Blade Shape | Clip Point |
| Edge Angle | Not Available |
| Blade Hardness (HRC) | 53-58 |
| Blade Grind | Flat Grind |
| Blade Stamp | Not Available |
| Handle Material | Modified Krayton |
| Handle Colour | Brown |
| Sheath Material | Glass Filled Nylon |
| Sheath Attachment | MOLLE Compatible |
| Sheath Colour | Tan |
D2 Extreme Knife with Serrated Edge and Cordura Sheath by KA-BAR
498 USMC Combat Knife Genuine Issue by Ontario Knife Company
Canada's Source for Knives by Ontario Knife Company
Fairbairn Sykes Commando by Sheffield Knives
Black Tanto with Hard Sheath by KA-BAR® Knives
493 M9 Bayonet & Scabbard - Black by Ontario Knife Company
